Day: February 10, 2016

Choose correct Ribbons for TSC TTP 244 Pro Barcode Printer

Gulshan Marwah

TSC TTP 244 Pro Barcode Printer :

The TSC TTP-244 Pro is designed to print a wide assortment of labels, including shipping labels and compliance and general-purpose product-identification labels and tags. The TTP-244 Pro is ideal for customers looking for a high quality barcode printer, coupled with low ownership costs.

TSC TTP 244 Pro
TSC TTP 244 Pro

DESCRIPTION:

This TSC TTP 244 Pro Barcode Printer ensures user-friendly and reliable operation. It uses a thermal print method which can carry out various functions along with barcoding and labeling. This printer has the largest ribbon capacity. It is easy to install and requires minimum maintenance. This printer can produce professional output at a faster rate. This barcode printer has an Internal Memory of 8 MB, which stores print information about a document for later use. This printer offers a high performance at an affordable cost. This barcode printer can be connected by USB interface, making it user-friendly and portable.

KEY FEATURES:

  1. 200 MHz 32-bit RISC processor with 8 MB SDRAM, 4 MB Flash memory.
  2. Internally scalable true type fonts
  3. TSPL-EZ firmware emulates Eltron and Zebra languages out of the box Dual-motor gear driven design
  4. 300 meter (984’) ribbon supply on a 25.4 mm (1”) core (coated side out)
  5. 5 inches per second print speed
  6. USB 2.0 & RS-232 interfaces standard
  7. Free bundled labeling software and Windows drivers

 

Ribbon Specifications for TSC TTP 244 Pro Barcode Printer:

Ribbon outside diameter Max. 67 mm OD
Ribbon length 300 m
Ribbon core inside diameter 1” core
Ribbon width 40 mm ~ 110 mm (1.6” ~ 4.3”)
Ribbon wound type Ink coated outside

 

Note: The maximum length of ribbon depends on its thickness and core outside diameter.

The formula below defines the correlation between ribbon roll length and ribbon core diameter.

formula tscttp244 pro ribbon selection

L = Ribbon length

D = Max. roll diameter

d = Ribbon core outside diameter

t = Ribbon thickness

TSCproTTP244 ribbon guide

Coated Side Out Ribbons

  • The ink is coated on the outside of the ribbon in TSC TTP 244 Pro Printer; configure the Ribbon so that it unrolls from the bottom.
  • When it feeds around the print head, the ink will still be facing the label.

ribbon-coated-side-out

Choose Correct Ribbons Before Printing Media for TSC TTP 244 Pro.

Indian Barcode Corporation is the Official Distributor of TSC Barcode Printers and we provide the best unbeatable price to our customer along with we provide free service and care to our customers.

We are Manufacturer of Barcode labels and Ribbons for TSC TTP 244 Pro.

Call us for any Sales and Technical Query: 9717122688 or mail us on gm@indianbarcode.com

 

 

TSC Barcode Printers Service Center in India

Gulshan Marwah
tsc barcode printer customer care delhi

Indian Barcode Corporation TSC Service Center Dwarka New Delhi

Indian Barcode Corporation is one of the most reputed TSC Barcode Printers Service Centre for the TSC Barcode printer or TSC label Printers.  Please go through the below mentioned instructions for the Service and repair of your TSC Product. TSC Barcode Printers Service Centre in India Indian Barcode Corporation.

TSC Barcode Printers Service Centre
TSC Barcode Printers Service Centre

Terms of TSC Barcode Printers Service Centre

  • For TSC Printers under warranty, the warranty card and original purchase invoice from us must be produced at the time of handing over of the product for repair service.
  • For out warranty cases, an initial repair estimate shall be indicated at the time of depositing the set at the service center – this estimate would be tentative. If after inspection of set a revised estimate is warranted, customer shall be intimated such revised estimate for approval via letter / telephone / email / SMS at the contact information provided by customer for repair service.
  • Repair service shall be initiated only on approval of estimates. Customer shall be required to pay normal inspection charges (as applicable) and collect the product immediately if repair estimates are not approved.
  • Should a natural failure recur within 30 days of the repair service, Lab our Charge shall be waived off. In case of failure of the same part(s), the spare part(s) shall be replaced free of charge. However, should the failure be attributable to wrong usage or abuse, accident, lightning, ingress of water, external fire damage, natural disaster, improper ventilation, deterioration due to environmental conditions, excessive shock, normal wear and tear or any external cause not attributable to normal product failure, the part and labor will be chargeable subject to set being in repairable condition.
  • We reserve the right to decline repair service of products if the product is damaged extensively or the condition has deteriorated such that reliable repair service cannot be guaranteed or if the failure is caused due to lightning, ingress of water, fire, or if the product has been attended (repair service or modification) by any unauthorized person or if parts are procured by customer from any other source.
  • We shall not be liable for reliability of the product if it has been attended by any unauthorized person or party.
  • In case the spare part(s) are not available and have to be arranged / sourced afresh, a tentative date for repair service will be indicated and the customer will be required to deposit 100% advance, prior to the sourcing of the spare part(s).

Customer Satisfaction is our Key to Success.

For any further information or technical query please Contact us at : 

Indian barcode Corporation TSC Barcode Printers Service Centre in India

S-4, Plot No-7, Pocket-7, Pankaj Plaza,Near Metro Station, Sector-12,

Dwarka, New Delhi-110078(India).

Phone No: – +91-011-28032434, +91-011-46102688.

Email Id: – gm@indianbarcode.com

Hand phone: – 09810822688, 09717122688.

Contact Person: – Mr. Gulshan Marwah. (Director)

Web: http://www.indianbarcode.com